Spartus MIG 215 LCD zestaw nr 8

INVERTER 3-in-1 WELDER SPARTUS EASY MIG 215 LCD - SEMI-AUTOMATIC WITH SYNERGY AND MANUAL MODE

SPARTUS MIG 215 LCD  is a modern inverter semi-automatic welder, constructed based on IGBT transistors. It features gas shielded welding with neutral and active MIG/MAG gases, Manual Metal Arc Welding (MMA, SMAW), and TIG Lift welding with arc initiation by contact. The device can be used for welding materials such as carbon steel, stainless steel, magnesium alloys, aluminum, nickel, copper, and its alloys. It is suitable for spot welding and pulse welding of car body panels. The SPARTUS MIG 215 LCD device, thanks to its high output parameters, has no problem achieving a flat weld bead on thick materials compared to competing devices.

The polarity can be easily changed to enable gasless self-shielded wire welding. The maximum welding current for MIG-MAG-TIG methods is 200A, and for MMA method, it is 160A. The machine is powered by a single-phase 230V power supply. In SP MANUAL welding mode, the voltage and wire feed speed can be adjusted according to specific requirements. 

VIDEO PRESENTATION:

WELDING WITH ALL METHODS:

ADVANTAGES OF SPARTUS EASY MIG 215 LCD:

STRONG WIRE FEEDER enables the use of welding torches up to 4 m in length.

IGBT TRANSISTORS provide a stronger, more focused, and stable arc while consuming less energy.

WELDING CURRENT of 200A enables welding of materials up to 8mm.

LCD DISPLAY graphically indicates the adjustable parameters, making it an ideal solution for beginners.

2T-4T MODES facilitate work on short and long welding sections. The 2T mode is used for short welding sections because the arc extinguishes immediately after releasing the micro switch. In the 4T mode, there is no need to continuously hold the micro switch during welding. It only needs to be clicked again to automatically extinguish the arc.

SYNERGIC PROGRAMS: The semi-automatic device has built-in welding programs, making it much easier to weld demanding materials. We select the appropriate program and can start working. Voltage and wire feed speed are adjusted using a single dial. We also have the option to make adjustments to the welding parameters. The voltage correction is shown graphically, indicating the appearance of the weld bead. The bead can be convex or flat, depending on the settings.

MANUAL MODE (SP) allows for manual settings. We can independently adjust the welding current and wire feed speed.

ADJUSTABLE INDUCTANCE determines the amount of heat input into the material. Additionally, the adjustment affects the width of the weld bead and the depth of penetration into the material. This function is mainly used in brazing with copper alloy wires. Copper alloy wires have a lower melting temperature, allowing us to use the semi-automatic device for spot welding car body sheets.

POLARITY SWITCH provides the ability to weld with self-shielding flux-cored wire.

EURO SOCKET allows for the use of various interchangeable MIG torches. The device can accommodate torches up to 4 meters in length.

HOT START briefly increases the welding current at the moment of arc ignition. This prevents the electrode from sticking during the initial phase of welding. This function enables faster arc ignition with rutile and basic electrodes.

ARC FORCE dynamically shortens the arc length as the welding current increases, preventing the arc from extinguishing when the electrode contacts the welded material. This function facilitates the learning process of MMA welding.

VRD (VOLTAGE REDUCTION DEVICE) cuts off the power supply within milliseconds after welding is completed and reduces the voltage on the coated electrode to a safe level. This function is particularly useful when welding in humid environments or excavations.

TIG LIFT allows for welding carbon steel and stainless steel in argon shielding gas.

TIGLIFT WELDING WITH EASYMIG 210, 210S, 215 LCD DEVICES

TIGLIFT WELDING WITH EASYMIG 210, 210S, 215 LCD DEVICES.

WITH THIS DEVICE, WE CAN WELD:

• Carbon steel up to 8 mm
• Stainless steel up to 6 mm
• Aluminum up to 6 mm
• Brazing with CUSI3-CUSN wire
• Welding with self-shielding wire (NO GAS)
• MMA welding with a 4 mm diameter electrode
• TIG LIFT welding of carbon steel up to 6 mm

SAMPLES WELDED WITH SPARTUS MIG 215 LCD:

3 mm STEEL.

5 mm ALUMINUM.

8 mm STEEL.

THE SET INCLUDES:

EQUIPMENT INCLUDED:

• SPARTUS MIG 215 LCD 
• Welding torch 15/3 m
• Electrode cable - 2 m
• Ground cable - 2 m
• Steel rollers 0.8-1.0 in the wire feeder - 1 pc
• Steel liner in holder - 1 pc
• SG2 wire 0.8 5 kg - 1 pc
• SG2 wire 1.0 5 kg - 1 pc
• Ar/CO2 regulator with 2 pressure gauges
• 8 L Argon cylinder - 1 pc.
• TIGLIFT torch 17, 4 m - 1 pc.
• 8 L Argon/CO2 cylinder - 1 pc.
• Leather gloves - 1 pc.
• Automatic TRUE COLOR welding helmet - 1 pc.
• Set of magnetic angles - 4 pcs.

MIG/MAG PARTS:

• Current nozzle 0.8 - 10 pcs
• Current nozzle 1,0 - 10 pcs
• Current nozzle 1,2 - 5 pcs
• Current nozzle 1,0 AL - 5 pcs
• Gas nozzle - 13 pcs
• Collet Body - 2 pcs
• 150 spring 150 - 2 pcs
• Microswitch for the handle - 1 pc.
• MIG cleaner - 1 pc.
• Wrench - 1 pc
• Anti-scratch preparation - 1 pc
• MIGBOX organizer - 1 pc
  

TIG PARTS:

• Tungsten electrodes - 5 pcs.
• Collet Body - 1 pc.
• Tig Collets - 4 pcs.
• Standard ceramic nozzles - 3 pcs.
• TIG Back Caps - 2 pcs.Gas lenses - 2 pcs.
  
• Insulator - 1 pc.
• Ceramic nozzles for lenses - 2 pcs.
• TIGBOX organizer - 1 pc.
• Carbon steel wires.
• Stainless steel wires.

If you need to add something to the set, call us and we will configure the set according to your preferences.

MANUFACTURER'S WARRANTY SPARTUS DOOR TO DOOR

SPARTUS products purchased in our store are brand new and have a manufacturer's warranty. The warranty card is filled in on the day of purchase and it is consistent with the numbers on the receipt. We provide warranty and post-warranty service for SPARTUS devices. If you buy SPARTUS products from us, you have a guarantee of support in the event of a failure and support during the first start-up of the machine. In the event of a fault, the courier picks up the damaged equipment from the location indicated in the service form and after repairing, delivers the equipment free of defects. Transport to the service is covered by the SPARTUS company.